Harness
the power of the sun to charge your battery - FREE
Each
Uni-Solar solar battery charger utilises Triple Junction silicon solar
cells. These cells are made in a roll to roll deposition process on a continuous
roll of stainless steel sheet metal. The result is a unique, flexible,
lightweight cell.
The vinyl and foam modules
are also exceptionally durable. They're encapsulated in UV stabilised polymers
and bonded and stitched to a cushioned backing material. This gives excellent
long term life for the product. Bypass diodes are connected across each cell,
allowing the modules to produce power even when partially shaded. Product
warranty is three years.
Blocking diodes are included
within each potted junction box. A blocking diode prevents battery discharge
into the module.
Each panel has 2.5 metres
of cable with a two pin plug to a .8 metre fused battery cable.
Triple Junction
Technology
The heart of the new Uni-Solar
battery chargers is the Triple Junction silicon cell unique to United Solar.
Each cell is composed of three
semiconductor junctions stacked on top of each other. The bottom cell absorbs
red light, the middle cell absorbs green light and the top cell absorbs blue
light. This spectrum splitting capability is the key to higher
efficiency.
| Rated power |
32 watts |
| Operating
voltage |
16.5 volts |
| Operating
current |
1.94 amps |
| Weight |
1.4kg |
| Size |
42cm wide X 143cm
long |
|
NB: Performance can
vary by up to 10% from these specifications, which were taken at 25 degrees
centigrade.
$575
Note: These prices are
ex Brisbane and quoted in Australian dollars and include Australian
GST. If you're located overseas take 10% off! Need to convert
to another currency? Use our
pop-up currency
converter! |
|
|
